How can I connect to Android with ADB over TCP? [closed]

Manual Process

From your device, if it is rooted

According to a post on xda-developers, you can enable ADB over Wi-Fi from the device with the commands:

susetprop service.adb.tcp.port 5555stop adbdstart adbd

And you can disable it and return ADB to listening on USB with

setprop service.adb.tcp.port -1stop adbdstart adbd

From a computer, if you have USB access already (no root required)

It is even easier to switch to using Wi-Fi, if you already have USB. From a command line on the computer that has the device connected via USB, issue the commands

adb tcpip 5555adb connect 192.168.0.101:5555

Be sure to replace 192.168.0.101 with the IP address that is actually assigned to your device. Once you are done, you can disconnect from the adb tcp session by running:

adb disconnect 192.168.0.101:5555

You can find the IP address of a tablet in two ways:

Manual IP Discovery:

Go into Android's WiFi settings, click the menu button in the action bar (the vertical ellipsis), hit Advanced and see the IP address at the bottom of the screen.

Use ADB to discover IP:

Execute the following command via adb:

adb shell ip -f inet addr show wlan0

To tell the ADB daemon return to listening over USB

adb usb

Apps to automate the process

There are also several apps on Google Play that automate this process. A quick search suggests adbWireless, WiFi ADB and ADB WiFi. All of these require root access, but adbWireless requires fewer permissions.

This is really simple if your phone is rooted.

Download a terminal emulator from Google Play (there are lots that are free). Make sure that your Android device is connected to your Wi-Fi and get the Wi-Fi IP address. Open the terminal program and type:

susetprop service.adb.tcp.port 5555stop adbdstart adbd

Now go to your computer (assuming that you are using Windows) and create a shortcut on the desktop for "cmd.exe" (without the quotations).

Right click on the cmd shortcut and choose "Run as Administrator"

Change to your android-sdk-windows\tools folder

Type:

adb connect ***wifi.ip.address***:5555(example: adb connect 192.168.0.105:5555)

adb should now say that you are connected.

Note: if you are too fast to give the connect command it may fail. So try at least two times five seconds apart before you say this doesn't work.

1. Connect device via USB and make sure debugging is working, then run:

   adb tcpip 5555adb connect <DEVICE_IP_ADDRESS>:5555

2. Disconnect USB and proceed with wireless debugging.

3. When you're done and want to switch back to USB debugging, run:

   adb -s <DEVICE_IP_ADDRESS>:5555

To find the IP address of your device, go to Settings > Wi-Fi > Advanced > IP Address on your device or run adb shell netcfg.

No root required. Only one device can be debugged at a time.

See this XDA post.

The adb command is located in the platform-tools folder of the Android SDK.