Finding current executable's path without /proc/self/exe

Some OS-specific interfaces:

• Mac OS X: _NSGetExecutablePath() (man 3 dyld)
• Linux: readlink /proc/self/exe
• Solaris: getexecname()
• FreeBSD: sysctl CTL_KERN KERN_PROC KERN_PROC_PATHNAME -1
• FreeBSD if it has procfs: readlink /proc/curproc/file (FreeBSD doesn't have procfs by default)
• NetBSD: readlink /proc/curproc/exe
• DragonFly BSD: readlink /proc/curproc/file
• Windows: GetModuleFileName() with hModule = NULL

There are also third party libraries that can be used to get this information, such as whereami as mentioned in prideout's answer, or if you are using Qt, QCoreApplication::applicationFilePath() as mentioned in the comments.

The portable (but less reliable) method is to use argv[0]. Although it could be set to anything by the calling program, by convention it is set to either a path name of the executable or a name that was found using $PATH.

Some shells, including bash and ksh, set the environment variable "_" to the full path of the executable before it is executed. In that case you can use getenv("_") to get it. However this is unreliable because not all shells do this, and it could be set to anything or be left over from a parent process which did not change it before executing your program.

The use of /proc/self/exe is non-portable and unreliable. On my Ubuntu 12.04 system, you must be root to read/follow the symlink. This will make the Boost example and probably the whereami() solutions posted fail.

This post is very long but discusses the actual issues and presents code which actually works along with validation against a test suite.

The best way to find your program is to retrace the same steps the system uses. This is done by using argv[0] resolved against file system root, pwd, path environment and considering symlinks, and pathname canonicalization. This is from memory but I have done this in the past successfully and tested it in a variety of different situations. It is not guaranteed to work, but if it doesn't you probably have much bigger problems and it is more reliable overall than any of the other methods discussed. There are situations on a Unix compatible system in which proper handling of argv[0] will not get you to your program but then you are executing in a certifiably broken environment. It is also fairly portable to all Unix derived systems since around 1970 and even some non-Unix derived systems as it basically relies on libc() standard functionality and standard command line functionality. It should work on Linux (all versions), Android, Chrome OS, Minix, original Bell Labs Unix, FreeBSD, NetBSD, OpenBSD, BSD x.x, SunOS, Solaris, SYSV, HP-UX, Concentrix, SCO, Darwin, AIX, OS X, NeXTSTEP, etc. And with a little modification probably VMS, VM/CMS, DOS/Windows, ReactOS, OS/2, etc. If a program was launched directly from a GUI environment, it should have set argv[0] to an absolute path.

Understand that almost every shell on every Unix compatible operating system that has ever been released basically finds programs the same way and sets up the operating environment almost the same way (with some optional extras). And any other program that launches a program is expected to create the same environment (argv, environment strings, etc.) for that program as if it were run from a shell, with some optional extras. A program or user can setup an environment that deviates from this convention for other subordinate programs that it launches but if it does, this is a bug and the program has no reasonable expectation that the subordinate program or its subordinates will function correctly.

Possible values of argv[0] include:

• /path/to/executable — absolute path
• ../bin/executable — relative to pwd
• bin/executable — relative to pwd
• ./foo — relative to pwd
• executable — basename, find in path
• bin//executable — relative to pwd, non-canonical
• src/../bin/executable — relative to pwd, non-canonical, backtracking
• bin/./echoargc — relative to pwd, non-canonical

Values you should not see:

• ~/bin/executable — rewritten before your program runs.
• ~user/bin/executable — rewritten before your program runs
• alias — rewritten before your program runs
• $shellvariable — rewritten before your program runs
• *foo* — wildcard, rewritten before your program runs, not very useful
• ?foo? — wildcard, rewritten before your program runs, not very useful

In addition, these may contain non-canonical path names and multiple layers of symbolic links. In some cases, there may be multiple hard links to the same program. For example, /bin/ls, /bin/ps, /bin/chmod, /bin/rm, etc. may be hard links to /bin/busybox.

To find yourself, follow the steps below:

• Save pwd, PATH, and argv[0] on entry to your program (or initialization of your library) as they may change later.

• Optional: particularly for non-Unix systems, separate out but don't discard the pathname host/user/drive prefix part, if present; the part which often precedes a colon or follows an initial "//".

• If argv[0] is an absolute path, use that as a starting point. An absolute path probably starts with "/" but on some non-Unix systems it might start with "" or a drive letter or name prefix followed by a colon.

• Else if argv[0] is a relative path (contains "/" or "" but doesn't start with it, such as "../../bin/foo", then combine pwd+"/"+argv[0] (use present working directory from when program started, not current).

• Else if argv[0] is a plain basename (no slashes), then combine it with each entry in PATH environment variable in turn and try those and use the first one which succeeds.

• Optional: Else try the very platform specific /proc/self/exe, /proc/curproc/file (BSD), and (char *)getauxval(AT_EXECFN), and dlgetname(...) if present. You might even try these before argv[0]-based methods, if they are available and you don't encounter permission issues. In the somewhat unlikely event (when you consider all versions of all systems) that they are present and don't fail, they might be more authoritative.

• Optional: check for a path name passed in using a command line parameter.

• Optional: check for a pathname in the environment explicitly passed in by your wrapper script, if any.

• Optional: As a last resort try environment variable "_". It might point to a different program entirely, such as the users shell.

• Resolve symlinks, there may be multiple layers. There is the possibility of infinite loops, though if they exist your program probably won't get invoked.

• Canonicalize filename by resolving substrings like "/foo/../bar/" to "/bar/". Note this may potentially change the meaning if you cross a network mount point, so canonization is not always a good thing. On a network server, ".." in symlink may be used to traverse a path to another file in the server context instead of on the client. In this case, you probably want the client context so canonicalization is ok. Also convert patterns like "/./" to "/" and "//" to "/".In shell, readlink --canonicalize will resolve multiple symlinks and canonicalize name. Chase may do similar but isn't installed. realpath() or canonicalize_file_name(), if present, may help.

If realpath() doesn't exist at compile time, you might borrow a copy from a permissively licensed library distribution, and compile it in yourself rather than reinventing the wheel. Fix the potential buffer overflow (pass in sizeof output buffer, think strncpy() vs strcpy()) if you will be using a buffer less than PATH_MAX. It may be easier just to use a renamed private copy rather than testing if it exists. Permissive license copy from android/darwin/bsd:https://android.googlesource.com/platform/bionic/+/f077784/libc/upstream-freebsd/lib/libc/stdlib/realpath.c

Be aware that multiple attempts may be successful or partially successful and they might not all point to the same executable, so consider verifying your executable; however, you may not have read permission — if you can't read it, don't treat that as a failure. Or verify something in proximity to your executable such as the "../lib/" directory you are trying to find. You may have multiple versions, packaged and locally compiled versions, local and network versions, and local and USB-drive portable versions, etc. and there is a small possibility that you might get two incompatible results from different methods of locating. And "_" may simply point to the wrong program.

A program using execve can deliberately set argv[0] to be incompatible with the actual path used to load the program and corrupt PATH, "_", pwd, etc. though there isn't generally much reason to do so; but this could have security implications if you have vulnerable code that ignores the fact that your execution environment can be changed in variety of ways including, but not limited, to this one (chroot, fuse filesystem, hard links, etc.) It is possible for shell commands to set PATH but fail to export it.

You don't necessarily need to code for non-Unix systems but it would be a good idea to be aware of some of the peculiarities so you can write the code in such a way that it isn't as hard for someone to port later. Be aware that some systems (DEC VMS, DOS, URLs, etc.) might have drive names or other prefixes which end with a colon such as "C:", "sys$drive:[foo]bar", and "file:///foo/bar/baz". Old DEC VMS systems use "[" and "]" to enclose the directory portion of the path though this may have changed if your program is compiled in a POSIX environment. Some systems, such as VMS, may have a file version (separated by a semicolon at the end). Some systems use two consecutive slashes as in "//drive/path/to/file" or "user@host:/path/to/file" (scp command) or "file://hostname/path/to/file" (URL). In some cases (DOS and Windows), PATH might have different separator characters — ";" vs ":" and "" vs "/" for a path separator. In csh/tsh there is "path" (delimited with spaces) and "PATH" delimited with colons but your program should receive PATH so you don't need to worry about path. DOS and some other systems can have relative paths that start with a drive prefix. C:foo.exe refers to foo.exe in the current directory on drive C, so you do need to lookup current directory on C: and use that for pwd.

An example of symlinks and wrappers on my system:

/usr/bin/google-chrome is symlink to/etc/alternatives/google-chrome  which is symlink to/usr/bin/google-chrome-stable which is symlink to/opt/google/chrome/google-chrome which is a bash script which runs/opt/google/chome/chrome

Note that user bill posted a link above to a program at HP that handles the three basic cases of argv[0]. It needs some changes, though:

• It will be necessary to rewrite all the strcat() and strcpy() to use strncat() and strncpy(). Even though the variables are declared of length PATHMAX, an input value of length PATHMAX-1 plus the length of concatenated strings is > PATHMAX and an input value of length PATHMAX would be unterminated.
• It needs to be rewritten as a library function, rather than just to print out results.
• It fails to canonicalize names (use the realpath code I linked to above)
• It fails to resolve symbolic links (use the realpath code)

So, if you combine both the HP code and the realpath code and fix both to be resistant to buffer overflows, then you should have something which can properly interpret argv[0].

The following illustrates actual values of argv[0] for various ways of invoking the same program on Ubuntu 12.04. And yes, the program was accidentally named echoargc instead of echoargv. This was done using a script for clean copying but doing it manually in shell gets same results (except aliases don't work in script unless you explicitly enable them).

cat ~/src/echoargc.c#include <stdlib.h>#include <stdio.h>#include <unistd.h>main(int argc, char **argv){  printf("  argv[0]=\"%s\"\n", argv[0]);  sleep(1);  /* in case run from desktop */}tcc -o ~/bin/echoargc ~/src/echoargc.ccd ~/home/whitis/bin/echoargc  argv[0]="/home/whitis/bin/echoargc"echoargc  argv[0]="echoargc"bin/echoargc  argv[0]="bin/echoargc"bin//echoargc  argv[0]="bin//echoargc"bin/./echoargc  argv[0]="bin/./echoargc"src/../bin/echoargc  argv[0]="src/../bin/echoargc"cd ~/bin*echo*  argv[0]="echoargc"e?hoargc  argv[0]="echoargc"./echoargc  argv[0]="./echoargc"cd ~/src../bin/echoargc  argv[0]="../bin/echoargc"cd ~/junk~/bin/echoargc  argv[0]="/home/whitis/bin/echoargc"~whitis/bin/echoargc  argv[0]="/home/whitis/bin/echoargc"alias echoit=~/bin/echoargcechoit  argv[0]="/home/whitis/bin/echoargc"echoarg=~/bin/echoargc$echoarg  argv[0]="/home/whitis/bin/echoargc"ln -s ~/bin/echoargc junk1./junk1  argv[0]="./junk1"ln -s /home/whitis/bin/echoargc junk2./junk2  argv[0]="./junk2"ln -s junk1 junk3./junk3  argv[0]="./junk3"gnome-desktop-item-edit --create-new ~/Desktop# interactive, create desktop link, then click on it  argv[0]="/home/whitis/bin/echoargc"# interactive, right click on gnome application menu, pick edit menus# add menu item for echoargc, then run it from gnome menu argv[0]="/home/whitis/bin/echoargc" cat ./testargcscript 2>&1 | sed -e 's/^/    /g'#!/bin/bash# echoargc is in ~/bin/echoargc# bin is in pathshopt -s expand_aliasesset -vcat ~/src/echoargc.ctcc -o ~/bin/echoargc ~/src/echoargc.ccd ~/home/whitis/bin/echoargcechoargcbin/echoargcbin//echoargcbin/./echoargcsrc/../bin/echoargccd ~/bin*echo*e?hoargc./echoargccd ~/src../bin/echoargccd ~/junk~/bin/echoargc~whitis/bin/echoargcalias echoit=~/bin/echoargcechoitechoarg=~/bin/echoargc$echoargln -s ~/bin/echoargc junk1./junk1ln -s /home/whitis/bin/echoargc junk2./junk2ln -s junk1 junk3./junk3

These examples illustrate that the techniques described in this post should work in a wide range of circumstances and why some of the steps are necessary.

EDIT: Now, the program that prints argv[0] has been updated to actually find itself.

// Copyright 2015 by Mark Whitis.  License=MIT style#include <stdlib.h>#include <stdio.h>#include <unistd.h>#include <limits.h>#include <assert.h>#include <string.h>#include <errno.h>// "look deep into yourself, Clarice"  -- Hanibal Lectorchar findyourself_save_pwd[PATH_MAX];char findyourself_save_argv0[PATH_MAX];char findyourself_save_path[PATH_MAX];char findyourself_path_separator='/';char findyourself_path_separator_as_string[2]="/";char findyourself_path_list_separator[8]=":";  // could be ":; "char findyourself_debug=0;int findyourself_initialized=0;void findyourself_init(char *argv0){  getcwd(findyourself_save_pwd, sizeof(findyourself_save_pwd));  strncpy(findyourself_save_argv0, argv0, sizeof(findyourself_save_argv0));  findyourself_save_argv0[sizeof(findyourself_save_argv0)-1]=0;  strncpy(findyourself_save_path, getenv("PATH"), sizeof(findyourself_save_path));  findyourself_save_path[sizeof(findyourself_save_path)-1]=0;  findyourself_initialized=1;}int find_yourself(char *result, size_t size_of_result){  char newpath[PATH_MAX+256];  char newpath2[PATH_MAX+256];  assert(findyourself_initialized);  result[0]=0;  if(findyourself_save_argv0[0]==findyourself_path_separator) {    if(findyourself_debug) printf("  absolute path\n");     realpath(findyourself_save_argv0, newpath);     if(findyourself_debug) printf("  newpath=\"%s\"\n", newpath);     if(!access(newpath, F_OK)) {        strncpy(result, newpath, size_of_result);        result[size_of_result-1]=0;        return(0);     } else {    perror("access failed 1");      }  } else if( strchr(findyourself_save_argv0, findyourself_path_separator )) {    if(findyourself_debug) printf("  relative path to pwd\n");    strncpy(newpath2, findyourself_save_pwd, sizeof(newpath2));    newpath2[sizeof(newpath2)-1]=0;    strncat(newpath2, findyourself_path_separator_as_string, sizeof(newpath2));    newpath2[sizeof(newpath2)-1]=0;    strncat(newpath2, findyourself_save_argv0, sizeof(newpath2));    newpath2[sizeof(newpath2)-1]=0;    realpath(newpath2, newpath);    if(findyourself_debug) printf("  newpath=\"%s\"\n", newpath);    if(!access(newpath, F_OK)) {        strncpy(result, newpath, size_of_result);        result[size_of_result-1]=0;        return(0);     } else {    perror("access failed 2");      }  } else {    if(findyourself_debug) printf("  searching $PATH\n");    char *saveptr;    char *pathitem;    for(pathitem=strtok_r(findyourself_save_path, findyourself_path_list_separator,  &saveptr); pathitem; pathitem=strtok_r(NULL, findyourself_path_list_separator, &saveptr) ) {       if(findyourself_debug>=2) printf("pathitem=\"%s\"\n", pathitem);       strncpy(newpath2, pathitem, sizeof(newpath2));       newpath2[sizeof(newpath2)-1]=0;       strncat(newpath2, findyourself_path_separator_as_string, sizeof(newpath2));       newpath2[sizeof(newpath2)-1]=0;       strncat(newpath2, findyourself_save_argv0, sizeof(newpath2));       newpath2[sizeof(newpath2)-1]=0;       realpath(newpath2, newpath);       if(findyourself_debug) printf("  newpath=\"%s\"\n", newpath);      if(!access(newpath, F_OK)) {          strncpy(result, newpath, size_of_result);          result[size_of_result-1]=0;          return(0);      }    } // end for    perror("access failed 3");  } // end else  // if we get here, we have tried all three methods on argv[0] and still haven't succeeded.   Include fallback methods here.  return(1);}main(int argc, char **argv){  findyourself_init(argv[0]);  char newpath[PATH_MAX];  printf("  argv[0]=\"%s\"\n", argv[0]);  realpath(argv[0], newpath);  if(strcmp(argv[0],newpath)) { printf("  realpath=\"%s\"\n", newpath); }  find_yourself(newpath, sizeof(newpath));  if(1 || strcmp(argv[0],newpath)) { printf("  findyourself=\"%s\"\n", newpath); }  sleep(1);  /* in case run from desktop */}

And here is the output which demonstrates that in every one of the previous tests it actually did find itself.

tcc -o ~/bin/echoargc ~/src/echoargc.ccd ~/home/whitis/bin/echoargc  argv[0]="/home/whitis/bin/echoargc"  findyourself="/home/whitis/bin/echoargc"echoargc  argv[0]="echoargc"  realpath="/home/whitis/echoargc"  findyourself="/home/whitis/bin/echoargc"bin/echoargc  argv[0]="bin/echoargc"  realpath="/home/whitis/bin/echoargc"  findyourself="/home/whitis/bin/echoargc"bin//echoargc  argv[0]="bin//echoargc"  realpath="/home/whitis/bin/echoargc"  findyourself="/home/whitis/bin/echoargc"bin/./echoargc  argv[0]="bin/./echoargc"  realpath="/home/whitis/bin/echoargc"  findyourself="/home/whitis/bin/echoargc"src/../bin/echoargc  argv[0]="src/../bin/echoargc"  realpath="/home/whitis/bin/echoargc"  findyourself="/home/whitis/bin/echoargc"cd ~/bin*echo*  argv[0]="echoargc"  realpath="/home/whitis/bin/echoargc"  findyourself="/home/whitis/bin/echoargc"e?hoargc  argv[0]="echoargc"  realpath="/home/whitis/bin/echoargc"  findyourself="/home/whitis/bin/echoargc"./echoargc  argv[0]="./echoargc"  realpath="/home/whitis/bin/echoargc"  findyourself="/home/whitis/bin/echoargc"cd ~/src../bin/echoargc  argv[0]="../bin/echoargc"  realpath="/home/whitis/bin/echoargc"  findyourself="/home/whitis/bin/echoargc"cd ~/junk~/bin/echoargc  argv[0]="/home/whitis/bin/echoargc"  findyourself="/home/whitis/bin/echoargc"~whitis/bin/echoargc  argv[0]="/home/whitis/bin/echoargc"  findyourself="/home/whitis/bin/echoargc"alias echoit=~/bin/echoargcechoit  argv[0]="/home/whitis/bin/echoargc"  findyourself="/home/whitis/bin/echoargc"echoarg=~/bin/echoargc$echoarg  argv[0]="/home/whitis/bin/echoargc"  findyourself="/home/whitis/bin/echoargc"rm junk1 junk2 junk3ln -s ~/bin/echoargc junk1./junk1  argv[0]="./junk1"  realpath="/home/whitis/bin/echoargc"  findyourself="/home/whitis/bin/echoargc"ln -s /home/whitis/bin/echoargc junk2./junk2  argv[0]="./junk2"  realpath="/home/whitis/bin/echoargc"  findyourself="/home/whitis/bin/echoargc"ln -s junk1 junk3./junk3  argv[0]="./junk3"  realpath="/home/whitis/bin/echoargc"  findyourself="/home/whitis/bin/echoargc"

The two GUI launches described above also correctly find the program.

There is one potential pitfall. The access() function drops permissions if the program is setuid before testing. If there is a situation where the program can be found as an elevated user but not as a regular user, then there might be a situation where these tests would fail, although it is unlikely the program could actually be executed under those circumstances. One could use euidaccess() instead. It is possible, however, that it might find an inaccessable program earlier on path than the actual user could.

The whereami library by Gregory Pakosz implements this for a variety of platforms, using the APIs mentioned in mark4o's post. This is most interesting if you "just" need a solution that works for a portable project and are not interested in the peculiarities of the various platforms.

At the time of writing, supported platforms are:

• Windows
• Linux
• Mac
• iOS
• Android
• QNX Neutrino
• FreeBSD
• NetBSD
• DragonFly BSD
• SunOS

The library consists of whereami.c and whereami.h and is licensed under MIT and WTFPL2. Drop the files into your project, include the header and use it:

#include "whereami.h"int main() {  int length = wai_getExecutablePath(NULL, 0, NULL);  char* path = (char*)malloc(length + 1);  wai_getExecutablePath(path, length, &dirname_length);  path[length] = '\0';  printf("My path: %s", path);  free(path);  return 0;}