Deploying a minimal flask app in docker - server connection issues

The problem is you are only binding to the localhost interface, you should be binding to 0.0.0.0 if you want the container to be accessible from outside. If you change:

if __name__ == '__main__':    app.run()

to

if __name__ == '__main__':    app.run(host='0.0.0.0')

It should work.

Note that this will bind to all interfaces on the host, which may in some circumstances be a security risk - see https://stackoverflow.com/a/58138250/4332 for more information on binding to a specific interface.

When using the flask command instead of app.run, you can pass the --host option to change the host. The line in Docker would be:

CMD ["flask", "run", "--host", "0.0.0.0"]

or

CMD flask run --host 0.0.0.0

Your Docker container has more than one network interface. For example, my container has the following:

$ ip addr1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00    inet 127.0.0.1/8 scope host lo       valid_lft forever preferred_lft forever32: eth0@if33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default     link/ether 02:42:ac:11:00:02 brd ff:ff:ff:ff:ff:ff link-netnsid 0    inet 172.17.0.2/16 brd 172.17.255.255 scope global eth0       valid_lft forever preferred_lft forever

if you run docker network inspect bridge, you can see that your container is connected to that bridge with the second interface in the above output. This default bridge is also connected to the Docker process on your host.

Therefore you would have to run the command:

CMD flask run --host 172.17.0.2

To access your Flask app running in a Docker container from your host machine. Replace 172.17.0.2 with whatever the particular IP address is of your container.