Write-Host vs Write-Information in PowerShell 5

The Write-* cmdlets allow you to channel the output of your PowerShell code in a structured way, so you can easily distinguish messages of different severity from each other.

• Write-Host: display messages to an interactive user on the console. Unlike the other Write-* cmdlets this one is neither suitable nor intended for automation/redirection purposes. Not evil, just different.
• Write-Output: write the "normal" output of the code to the default (success) output stream ("STDOUT").
• Write-Error: write error information to a separate stream ("STDERR").
• Write-Warning: write messages that you consider warnings (i.e. things that aren't failures, but something that the user should have an eye on) to a separate stream.
• Write-Verbose: write information that you consider more verbose than "normal" output to a separate stream.
• Write-Debug: write information that you consider relevant for debugging your code to a separate stream.

Write-Information is just a continuation of this approach. It allows you to implement log levels in your output (Debug, Verbose, Information, Warning, Error) and still have the success output stream available for regular output.

As for why Write-Host became a wrapper around Write-Information: I don't know the actual reason for this decision, but I'd suspect it's because most people don't understand how Write-Host actually works, i.e. what it can be used for and what it should not be used for.

To my knowledge there isn't a generally accepted or recommended approach to logging in PowerShell. You could for instance implement a single logging function like @JeremyMontgomery suggested in his answer:

function Write-Log {  Param(    [Parameter(Mandatory=$true, Position=0)]    [ValidateNotNullOrEmpty()]    [string]$Message,    [Parameter(Mandatory=$false, Position=1)]    [ValidateSet('Error', 'Warning', 'Information', 'Verbose', 'Debug')]    [string]$LogLevel = 'Information'  )  switch ($LogLevel) {    'Error'       { ... }    'Warning'     { ... }    'Information' { ... }    'Verbose'     { ... }    'Debug'       { ... }    default       { throw "Invalid log level: $_" }  }}Write-Log 'foo'                    # default log level: InformationWrite-Log 'foo' 'Information'      # explicit log level: InformationWrite-Log 'bar' 'Debug'

or a set of logging functions (one for each log level):

function Write-LogInformation {  Param(    [Parameter(Mandatory=$true, Position=0)]    [ValidateNotNullOrEmpty()]    [string]$Message  )  ...}function Write-LogDebug {  Param(    [Parameter(Mandatory=$true, Position=0)]    [ValidateNotNullOrEmpty()]    [string]$Message  )  ...}...Write-LogInformation 'foo'Write-LogDebug 'bar'

Another option is to create a custom logger object:

$logger = New-Object -Type PSObject -Property @{  Filename = ''  Console  = $true}$logger | Add-Member -Type ScriptMethod -Name Log -Value {  Param(    [Parameter(Mandatory=$true, Position=0)]    [ValidateNotNullOrEmpty()]    [string]$Message,    [Parameter(Mandatory=$false, Position=1)]    [ValidateSet('Error', 'Warning', 'Information', 'Verbose', 'Debug')]    [string]$LogLevel = 'Information'  )  switch ($LogLevel) {    'Error'       { ... }    'Warning'     { ... }    'Information' { ... }    'Verbose'     { ... }    'Debug'       { ... }    default       { throw "Invalid log level: $_" }  }}$logger | Add-Member -Type ScriptMethod -Name LogDebug -Value {  Param([Parameter(Mandatory=$true)][string]$Message)  $this.Log($Message, 'Debug')}$logger | Add-Member -Type ScriptMethod -Name LogInfo -Value {  Param([Parameter(Mandatory=$true)][string]$Message)  $this.Log($Message, 'Information')}...Write-Log 'foo'                    # default log level: Information$logger.Log('foo')                 # default log level: Information$logger.Log('foo', 'Information')  # explicit log level: Information$logger.LogInfo('foo')             # (convenience) wrapper method$logger.LogDebug('bar')

Either way you can externalize the logging code by

• putting it into a separate script file and dot-sourcing that file:

  . 'C:\path\to\logger.ps1'

• putting it into a module and importing that module:

  Import-Module Logger

To complement Ansgar's helpful and comprehensive answer:

Write-Host became (in essence) a wrapper for
Write-Information -InformationAction Continue in PSv5, presumably because:

• it enables suppressing or redirecting Write-Host messages, which was not previously possible (in PowerShell 4 or below, Write-Host bypassed PowerShell's streams and output directly to the host),

• while preserving backward compatibility in that the messages are output by default - unlike with Write-Information, whose default behavior is to be silent (because it respects preference variable $InformationPreference, whose default value is SilentlyContinue).

While Write-Host is therefore now (PSv5+) a bit of a misnomer — it doesn't necessarily write to the host anymore — it still has one distinct advantage over Write-Information (as you state): it can produce colored output with -ForegroundColor and -BackgroundColor.

Ansgar's answer has the conventional logging perspective covered, but PowerShell's Start-Transcript cmdlet may serve as a built-in alternative (see below).

As for your desire to output messages to the host while also capturing them in a log file:

PowerShell's session transcripts - via Start-Transcript and Stop-Transcript - may give you what you want.

As the name suggests, transcripts capture whatever prints to the screen (without coloring), which therefore by default includes success output, however.
Applied to your example:

$null = Start-Transcript "D:\foo.log"$InformationPreference = "Continue"Write-Information "Some Message"Write-Information "Another Message"$null = Stop-Transcript

The above will print messages to both the screen and the transcript file; note that, curiously, only in the file will they be prefixed with INFO:.
(By contrast, Write-Warning, Write-Verbose and Write-Debug - if configured to produce output - use prefix WARNING:, VERBOSE:, DEBUG: both on-screen and in the file; similarly, Write-Error produces "noisy" multiline input both on-screen and in the file.)

Note one bug that only affects Windows PowerShell (it has been fixed in PowerShell [Core].^{Thanks, JohnLBevan.}): output from Write-Information shows up in the transcript file (but not on the screen) even when $InformationPreference is set to SilentlyContinue (the default); the only way to exclude Write-Information output (via the preference variable or -InformationAction parameter) appears to be a value of Ignore - which silences the output categorically - or, curiously, Continue, in which it only prints to the console, as PetSerAl points out.

In a nutshell, you can use Start-Transcript as a convenient, built-in approximation of a logging facility, whose verbosity you can control from the outside via the preference variables ($InformationPreference, $VerbosePreference, ...), with the following important differences from conventional logging:

• Generally, what goes into the transcript file is also output to the console (which could generally be considered a plus).

• However, success output (data output) is by default also sent to the transcript - unless you capture it or suppress it altogether - and you cannot selectively keep it out of the transcript:

  • If you capture or suppress it, it won't show in in the host (the console, by default) either^[1].

  • The inverse, however, is possible: you can send output to the transcript only (without echoing it in the console), by way of Out-Default -Transcript ^{Thanks, PetSerAl}; e.g.,
    'to transcript only' | Out-Default -Transcript; however, as of PowerShell 7.0 this appears to log the output twice in the transcript; also note that Out-Default is generally not meant to be called from user code - see this answer.

• Generally, external redirections (applying > to a call to a script that internally performs transcription) keep streams out of the transcript, with two exceptions, as of PowerShell 7.0:

  • Write-Host output, even if 6> or *> redirections are used.
  • Error output, even if 2> or *> redirections are used.
    However, using $ErrorActionPreference = 'SilentlyContinue' / 'Ignore' does keep non-terminating errors out of the transcript, but not terminating ones.

• Transcript files aren't line-oriented (there's a block of header lines with invocation information, and there's no guarantee that output produced by the script is confined to a line), so you cannot expect to parse them in a line-by-line manner.

^{[1] PetSerAl mentions the following limited and somewhat cumbersome workaround (PSv5+) for sending success output to the console only, which notably precludes sending the output through the pipeline or capturing it:
'to console only' | Out-String -Stream | ForEach-Object { $Host.UI.WriteLine($_) }}

PowerShell is about automation.

Sometimes, you run a script multiple times a day and you don't want to see the output all the time.

Write-Host has no possibility of hiding the output. It gets written on the Console, no matter what.

With Write-Information, you can specify the -InformationAction Parameter on the Script. With this parameter, you can specify if you want to see the messages (-InformationAction Continue) or not (-InformationAction SilentlyContinue)

Edit:And please use "Some Message" | out-file D:\foo.log for logging, and neither Write-Host or Write-Information