When you say

(a['x']==1) and (a['y']==10)

You are implicitly asking Python to convert (a['x']==1) and (a['y']==10) to boolean values.

NumPy arrays (of length greater than 1) and Pandas objects such as Series do not have a boolean value -- in other words, they raise

ValueError: The truth value of an array is ambiguous. Use a.empty, a.any() or a.all().

when used as a boolean value. That's because its unclear when it should be True or False. Some users might assume they are True if they have non-zero length, like a Python list. Others might desire for it to be True only if all its elements are True. Others might want it to be True if any of its elements are True.

Because there are so many conflicting expectations, the designers of NumPy and Pandas refuse to guess, and instead raise a ValueError.

Instead, you must be explicit, by calling the empty(), all() or any() method to indicate which behavior you desire.

In this case, however, it looks like you do not want boolean evaluation, you want element-wise logical-and. That is what the & binary operator performs:

(a['x']==1) & (a['y']==10)

returns a boolean array.

By the way, as alexpmil notes, the parentheses are mandatory since & has a higher operator precedence than ==.Without the parentheses, a['x']==1 & a['y']==10 would be evaluated as a['x'] == (1 & a['y']) == 10 which would in turn be equivalent to the chained comparison (a['x'] == (1 & a['y'])) and ((1 & a['y']) == 10). That is an expression of the form Series and Series.The use of and with two Series would again trigger the same ValueError as above. That's why the parentheses are mandatory.

TLDR; _{Logical Operators in Pandas are &, | and ~, and parentheses (...) is important!}

Python's and, or and not logical operators are designed to work with scalars. So Pandas had to do one better and override the bitwise operators to achieve vectorized (element-wise) version of this functionality.

So the following in python (exp1 and exp2 are expressions which evaluate to a boolean result)...

exp1 and exp2              # Logical ANDexp1 or exp2               # Logical ORnot exp1                   # Logical NOT

...will translate to...

exp1 & exp2                # Element-wise logical ANDexp1 | exp2                # Element-wise logical OR~exp1                      # Element-wise logical NOT

for pandas.

If in the process of performing logical operation you get a ValueError, then you need to use parentheses for grouping:

(exp1) op (exp2)

For example,

(df['col1'] == x) & (df['col2'] == y) 

And so on.

Boolean Indexing: A common operation is to compute boolean masks through logical conditions to filter the data. Pandas provides three operators: & for logical AND, | for logical OR, and ~ for logical NOT.

Consider the following setup:

np.random.seed(0)df = pd.DataFrame(np.random.choice(10, (5, 3)), columns=list('ABC'))df   A  B  C0  5  0  31  3  7  92  3  5  23  4  7  64  8  8  1

Logical AND

For df above, say you'd like to return all rows where A < 5 and B > 5. This is done by computing masks for each condition separately, and ANDing them.

Overloaded Bitwise & Operator
Before continuing, please take note of this particular excerpt of the docs, which state

Another common operation is the use of boolean vectors to filter the data. The operators are: | for or, & for and, and ~ for not. These must be grouped by using parentheses, since by default Python will evaluate an expression such as df.A > 2 & df.B < 3 as df.A > (2 & df.B) < 3, while the desired evaluation order is (df.A > 2) & (df.B < 3).

So, with this in mind, element wise logical AND can be implemented with the bitwise operator &:

df['A'] < 50    False1     True2     True3     True4    FalseName: A, dtype: booldf['B'] > 50    False1     True2    False3     True4     TrueName: B, dtype: bool

(df['A'] < 5) & (df['B'] > 5)0    False1     True2    False3     True4    Falsedtype: bool

And the subsequent filtering step is simply,

df[(df['A'] < 5) & (df['B'] > 5)]   A  B  C1  3  7  93  4  7  6

The parentheses are used to override the default precedence order of bitwise operators, which have higher precedence over the conditional operators < and >. See the section of Operator Precedence in the python docs.

If you do not use parentheses, the expression is evaluated incorrectly. For example, if you accidentally attempt something such as

df['A'] < 5 & df['B'] > 5

It is parsed as

df['A'] < (5 & df['B']) > 5

Which becomes,

df['A'] < something_you_dont_want > 5

Which becomes (see the python docs on chained operator comparison),

(df['A'] < something_you_dont_want) and (something_you_dont_want > 5)

Which becomes,

# Both operands are Series...something_else_you_dont_want1 and something_else_you_dont_want2

Which throws

ValueError: The truth value of a Series is ambiguous. Use a.empty, a.bool(), a.item(), a.any() or a.all().

So, don't make that mistake!¹

Avoiding Parentheses Grouping
The fix is actually quite simple. Most operators have a corresponding bound method for DataFrames. If the individual masks are built up using functions instead of conditional operators, you will no longer need to group by parens to specify evaluation order:

df['A'].lt(5)0     True1     True2     True3     True4    FalseName: A, dtype: booldf['B'].gt(5)0    False1     True2    False3     True4     TrueName: B, dtype: bool

df['A'].lt(5) & df['B'].gt(5)0    False1     True2    False3     True4    Falsedtype: bool

See the section on Flexible Comparisons.. To summarise, we have

╒════╤════════════╤════════════╕│    │ Operator   │ Function   │╞════╪════════════╪════════════╡│  0 │ >          │ gt         │├────┼────────────┼────────────┤│  1 │ >=         │ ge         │├────┼────────────┼────────────┤│  2 │ <          │ lt         │├────┼────────────┼────────────┤│  3 │ <=         │ le         │├────┼────────────┼────────────┤│  4 │ ==         │ eq         │├────┼────────────┼────────────┤│  5 │ !=         │ ne         │╘════╧════════════╧════════════╛

Another option for avoiding parentheses is to use DataFrame.query (or eval):

df.query('A < 5 and B > 5')   A  B  C1  3  7  93  4  7  6

I have extensively documented query and eval in Dynamic Expression Evaluation in pandas using pd.eval().

operator.and_
Allows you to perform this operation in a functional manner. Internally calls Series.__and__ which corresponds to the bitwise operator.

import operator operator.and_(df['A'] < 5, df['B'] > 5)# Same as,# (df['A'] < 5).__and__(df['B'] > 5) 0    False1     True2    False3     True4    Falsedtype: booldf[operator.and_(df['A'] < 5, df['B'] > 5)]   A  B  C1  3  7  93  4  7  6

You won't usually need this, but it is useful to know.

Generalizing: np.logical_and (and logical_and.reduce)
Another alternative is using np.logical_and, which also does not need parentheses grouping:

np.logical_and(df['A'] < 5, df['B'] > 5)0    False1     True2    False3     True4    FalseName: A, dtype: booldf[np.logical_and(df['A'] < 5, df['B'] > 5)]   A  B  C1  3  7  93  4  7  6

np.logical_and is a ufunc (Universal Functions), and most ufuncs have a reduce method. This means it is easier to generalise with logical_and if you have multiple masks to AND. For example, to AND masks m1 and m2 and m3 with &, you would have to do

m1 & m2 & m3

However, an easier option is

np.logical_and.reduce([m1, m2, m3])

This is powerful, because it lets you build on top of this with more complex logic (for example, dynamically generating masks in a list comprehension and adding all of them):

import operatorcols = ['A', 'B']ops = [np.less, np.greater]values = [5, 5]m = np.logical_and.reduce([op(df[c], v) for op, c, v in zip(ops, cols, values)])m # array([False,  True, False,  True, False])df[m]   A  B  C1  3  7  93  4  7  6

_{1 - I know I'm harping on this point, but please bear with me. This is a very, very common beginner's mistake, and must be explained very thoroughly.}

Logical OR

For the df above, say you'd like to return all rows where A == 3 or B == 7.

Overloaded Bitwise |

df['A'] == 30    False1     True2     True3    False4    FalseName: A, dtype: booldf['B'] == 70    False1     True2    False3     True4    FalseName: B, dtype: bool

(df['A'] == 3) | (df['B'] == 7)0    False1     True2     True3     True4    Falsedtype: booldf[(df['A'] == 3) | (df['B'] == 7)]   A  B  C1  3  7  92  3  5  23  4  7  6

If you haven't yet, please also read the section on Logical AND above, all caveats apply here.

Alternatively, this operation can be specified with

df[df['A'].eq(3) | df['B'].eq(7)]   A  B  C1  3  7  92  3  5  23  4  7  6

operator.or_
Calls Series.__or__ under the hood.

operator.or_(df['A'] == 3, df['B'] == 7)# Same as,# (df['A'] == 3).__or__(df['B'] == 7)0    False1     True2     True3     True4    Falsedtype: booldf[operator.or_(df['A'] == 3, df['B'] == 7)]   A  B  C1  3  7  92  3  5  23  4  7  6

np.logical_or
For two conditions, use logical_or:

np.logical_or(df['A'] == 3, df['B'] == 7)0    False1     True2     True3     True4    FalseName: A, dtype: booldf[np.logical_or(df['A'] == 3, df['B'] == 7)]   A  B  C1  3  7  92  3  5  23  4  7  6

For multiple masks, use logical_or.reduce:

np.logical_or.reduce([df['A'] == 3, df['B'] == 7])# array([False,  True,  True,  True, False])df[np.logical_or.reduce([df['A'] == 3, df['B'] == 7])]   A  B  C1  3  7  92  3  5  23  4  7  6

Logical NOT

Given a mask, such as

mask = pd.Series([True, True, False])

If you need to invert every boolean value (so that the end result is [False, False, True]), then you can use any of the methods below.

Bitwise ~

~mask0    False1    False2     Truedtype: bool

Again, expressions need to be parenthesised.

~(df['A'] == 3)0     True1    False2    False3     True4     TrueName: A, dtype: bool

This internally calls

mask.__invert__()0    False1    False2     Truedtype: bool

But don't use it directly.

operator.inv
Internally calls __invert__ on the Series.

operator.inv(mask)0    False1    False2     Truedtype: bool

np.logical_not
This is the numpy variant.

np.logical_not(mask)0    False1    False2     Truedtype: bool

Note, np.logical_and can be substituted for np.bitwise_and, logical_or with bitwise_or, and logical_not with invert.

Logical operators for boolean indexing in Pandas

It's important to realize that you cannot use any of the Python logical operators (and, or or not) on pandas.Series or pandas.DataFrames (similarly you cannot use them on numpy.arrays with more than one element). The reason why you cannot use those is because they implicitly call bool on their operands which throws an Exception because these data structures decided that the boolean of an array is ambiguous:

>>> import numpy as np>>> import pandas as pd>>> arr = np.array([1,2,3])>>> s = pd.Series([1,2,3])>>> df = pd.DataFrame([1,2,3])>>> bool(arr)ValueError: The truth value of an array with more than one element is ambiguous. Use a.any() or a.all()>>> bool(s)ValueError: The truth value of a Series is ambiguous. Use a.empty, a.bool(), a.item(), a.any() or a.all().>>> bool(df)ValueError: The truth value of a DataFrame is ambiguous. Use a.empty, a.bool(), a.item(), a.any() or a.all().

I did cover this more extensively in my answer to the "Truth value of a Series is ambiguous. Use a.empty, a.bool(), a.item(), a.any() or a.all()" Q+A.

NumPys logical functions

However NumPy provides element-wise operating equivalents to these operators as functions that can be used on numpy.array, pandas.Series, pandas.DataFrame, or any other (conforming) numpy.array subclass:

• and has np.logical_and
• or has np.logical_or
• not has np.logical_not
• numpy.logical_xor which has no Python equivalent but is a logical "exclusive or" operation

So, essentially, one should use (assuming df1 and df2 are pandas DataFrames):

np.logical_and(df1, df2)np.logical_or(df1, df2)np.logical_not(df1)np.logical_xor(df1, df2)

Bitwise functions and bitwise operators for booleans

However in case you have boolean NumPy array, pandas Series, or pandas DataFrames you could also use the element-wise bitwise functions (for booleans they are - or at least should be - indistinguishable from the logical functions):

• bitwise and: np.bitwise_and or the & operator
• bitwise or: np.bitwise_or or the | operator
• bitwise not: np.invert (or the alias np.bitwise_not) or the ~ operator
• bitwise xor: np.bitwise_xor or the ^ operator

Typically the operators are used. However when combined with comparison operators one has to remember to wrap the comparison in parenthesis because the bitwise operators have a higher precedence than the comparison operators:

(df1 < 10) | (df2 > 10)  # instead of the wrong df1 < 10 | df2 > 10

This may be irritating because the Python logical operators have a lower precendence than the comparison operators so you normally write a < 10 and b > 10 (where a and b are for example simple integers) and don't need the parenthesis.

Differences between logical and bitwise operations (on non-booleans)

It is really important to stress that bit and logical operations are only equivalent for boolean NumPy arrays (and boolean Series & DataFrames). If these don't contain booleans then the operations will give different results. I'll include examples using NumPy arrays but the results will be similar for the pandas data structures:

>>> import numpy as np>>> a1 = np.array([0, 0, 1, 1])>>> a2 = np.array([0, 1, 0, 1])>>> np.logical_and(a1, a2)array([False, False, False,  True])>>> np.bitwise_and(a1, a2)array([0, 0, 0, 1], dtype=int32)

And since NumPy (and similarly pandas) does different things for boolean (Boolean or “mask” index arrays) and integer (Index arrays) indices the results of indexing will be also be different:

>>> a3 = np.array([1, 2, 3, 4])>>> a3[np.logical_and(a1, a2)]array([4])>>> a3[np.bitwise_and(a1, a2)]array([1, 1, 1, 2])

Summary table

Logical operator | NumPy logical function | NumPy bitwise function | Bitwise operator-------------------------------------------------------------------------------------       and       |  np.logical_and        | np.bitwise_and         |        &-------------------------------------------------------------------------------------       or        |  np.logical_or         | np.bitwise_or          |        |-------------------------------------------------------------------------------------                 |  np.logical_xor        | np.bitwise_xor         |        ^-------------------------------------------------------------------------------------       not       |  np.logical_not        | np.invert              |        ~

Where the logical operator does not work for NumPy arrays, pandas Series, and pandas DataFrames. The others work on these data structures (and plain Python objects) and work element-wise.However be careful with the bitwise invert on plain Python bools because the bool will be interpreted as integers in this context (for example ~False returns -1 and ~True returns -2).