codesign gives always no identity found error via terminal

I had some trouble with this as well. Double-check that your code-signing identity is in your keychain, and you might consider using the SHA-1 fingerprint instead of the name after the -s.

You can find the SHA-1 fingerprint by opening up Keychain Access and selecting your Developer ID Application: FOO certificate, and then choosing Get Info. From here, scroll to the bottom of the information until you reach Fingerprints. The SHA-1 fingerprint here can be copied and you will have to remove all of the spaces, but after that you will have a 40-character identifier which will be appropriate for placing after the -s in your codesign statement.

If you are still having problems locating the key, try the following from Terminal:

certtool y | grep Developer\ ID

and look for anything with Developer ID Application in the Common Name to verify that the certificate is actually in a keychain that is accessible from Terminal. If you don't see anything in response, that would indicate that the keychain containing your credentials is unavailable to your Terminal session. Reasons for this would include things like the keychain being locked, the shell running as another user, executing the command with different permissions (such as sudo).

After executing the command above, you should have at a minimum the following:

Developer ID Application: <your company name>Developer ID Installer: <your company name>Developer ID Certification Authority

If you don't have all three, you should go and download the missing elements. Although you may not currently need to build an Installer, there's no harm in having it around. The Application and Installer elements can be downloaded from the Mac Certificates section of the Certificates, Identifiers, & Profiles tab on Apple's Developer site. You should have listings there that are not expired. You may have listings there as well that have expired. To install the certificates in your keychain:

1. Access the Apple Developer Site
2. Access the Mac Dev Center
3. Access Certificates, Identifiers, & Profiles link
4. Download the Certificates from the portal
5. Double-click on the Certificates and Keychain Access should open
6. Allow Keychain Access to add the Certificates to your Keychain

The Developer ID Certification Authority should have been installed by Xcode, but if it wasn't, you can install it yourself. You will need to download that separately from Developer ID Authority or by clicking on the + link in Certificates tab and use the link at the bottom to download the Certificate.

This would also be a good time to make sure that you have the Apple Worldwide Developer Relations Certification Authority, which is the basis for some of the signing tools. It should be installed in your System keychain, by the Xcode installer and can be downloaded directly from the + link in the Certificates tab above or from Apple WWDR CA.

According to Apple's App Distribution Guide, there are specific keychains that are appropriate for each of the Certificates and keys:

• Your private Keys and your signing certificates (Developer ID Installer,Developer ID Application, and the App Store Certificates) should be in your login keychain
• The Apple Worldwide Developer Relations Certification Authority and Developer ID Certification Authority belong in the System keychain
• Your developer certificates also belong in your login keychain

Keychain Maintenance

Because Xcode automatically manipulates the keychains, and because some certificates are re-issued regularly when profiles change (although not for Developer ID, since it has multi-year certificates and doesn't require profiles), you can end up with a propagation of unnecessary and potentially confusing certificates in your keychain. It is a good idea to clean these out when they have expired, as they can create some confusion for Xcode.

WARNINGS

• Before performing any maintenance on your Keychains, make sure you have a backup of your keychains
• This process is intended for removing unnecessary Certificates relating to development, If the certificates don't start with Mac Developer, 3rd Party Mac Developer, iPhone Developer or Developer ID, do not mess with them at this time. If you accidentally delete the Certificate you received with an email (for example), even if it has expired, you may not be able to read the email that you received.

Things to do:

1. Quit Xcode
2. Run Keychain First Aid (from Keychain Access) and verify that your keychains are OK
3. Click on the Certificates Category on the left sidebar
4. Locate any expired developer certificates of the kinds mentioned above. They will show up with a small X in the lower right corner.
5. Select the Certificates you will be removing and back them up by using File > Export Items...
6. Put this file in a safe place and give it a good password
7. Delete the Certificates which you have backed up
8. Look through your remaining certificates and verify that you have the certificates mentioned in the preceding section. If you don't, you'll need to download, and possibly renew them.
9. Verify that the certificates are in the keychains that are indicated above (all your signing certs should be in your login keychain, for example)

while I did not do this for apple development code signing, I still think I have some valuable inside that could help you debug such a problem. The difference is that I created my own certificate while you got one from apple.

Check the trust of the cert, it must be trusted for code signing (on yosemite that is the third last in the trust section of the cert view in the keychain access). Be aware that for your code signing the cert should be in the login keychain, I needed it in the System keychain.

At first the cert was not known for codesigning to the keychain, because there was the Extension purpose "Code Signing" missing, you can find this if you look into the keychain and double click on the certificate:

I fixed that (you can not fix it as Apple provides the cert to you. The extension should just be there):

Then I added the certificate to the trusted signing certificates, after I had drag&dropped the certificate from the keychain to my desktop, which created the ~/Desktop/gdb-cert.cer (be aware you can omit -d and -r trustRoot:

$ sudo security add-trusted-cert -d -r trustRoot -p codeSign -k /Library/Keychains/System.keychain ~/Desktop/gdb-cert.cer

This was a bit tricky because I was mislead by some internet posts and did not look at the man page. Some said you should use add-trust (https://llvm.org/svn/llvm-project/lldb/trunk/docs/code-signing.txt). The terrible bit was that the command succeeded, but did not do what it should.

After that I found the new cert in the trusted certs like so:

$ security find-identity -p codesigningPolicy: Code Signing  Matching identities      1) E7419032D4..... "Mac Developer: FirstName LastName (K2Q869SWUE)"    (CSSMERR_TP_CERT_EXPIRED)      2) ACD43B6... "gdb-cert"  2 identities found  Valid identities only      1) ACD43... "gdb-cert"  1 valid identities found

In my case the apple cert is expired, but the one I was using to sign gdb was not (well, I just created it myself). Also be aware that the policy is named differently for the "security add-trusted-cert"(-p codeSign) and the "security find-identity" command (-p codesigning). I then went on to sign gdb and I also always got:

$ codesign --sign gdb-cert.cer --keychain ~/Library/Keychains/login.keychain `which gdb`  gdb-cert.cer: no identity found

because I was under the impression that I had to give the file name of the cert file to the --sign option, but that in fact was the CN of the certificate that I should have provided and should be in the trust store. You can find the CN here when double clicking on the cert in the keychain:

or in the above output of "security find-identity -p codesigning". Then I went on to sign and I had to give it the right keychain. In your case this would have to be the ~/Library/Keychains/login.keychain, in my case the System.keychain:

 codesign -s gdb-cert --keychain /Library/Keychains/System.keychain `which gdb` 

That then gave me a working gdb and it should give you a signed application.

The Answer finally was very simple. My Private Key was missing. For this I revoked the certificate and followed its steps in developer program (Especially creating CSR certificate during the process, which I did not get several times, unless I revoked the certificate).